$350.00 USD B E E T R O N I C S
SEE BEE LITE
A basic Chorus in so far as the Shoe Gaze
and Star Wars bells and whistles AKA
features are not part of it. I will leave the
layout to the videos or I will have to write
a manual, 😇
CONCLUSION __
Even the Lite is pricy. one has to pay
for all the artwork no mater what their
pedal. Today You get Green or Pink.
 |
| $190.00 USD |
EMMA E L E C T R O N I COnoMATOpoeiaThis made in Denmark is an early take on a Tweed like
Amp-in-a-box. The layout is Volume,Tone, Gain and
Saturation (which is compression via more gain)
CONCLUSION __
It does a very good job of a Tweed thing.Its dated double sized pedal is a drag. All
their pedals need an enclosure update.Priced $60 cheaper than most good
handmade so if the size is cool
with you then WTF.
MUIR AUDIO DESIGN
SILICON STEEL
overdrive ᓇ
The electric guitar started life being amplified by tubes so the
$265.00 USD
vocabulary like any instrument was developed by a their tone.
In short a tuba does not play violin parts, it just wouldn't sound
good, lol. The tubes themselves distorting the harmonics is the
big factor but it is the transformers especially the huge heavy
one on the output that is the icing on the cake.It it is not a big jump to create that harmonic kick in the butt
putting a small transformer in a pedal to add more harmonic
boost. Rupert Neve put them in his famous boards for just this
purpose. In fact one for every channel to vary the crunch.
Muir's first pedal was a transformer pre/EQ before he added the
extra gain found in a pedal.
The layout is Volume, Gain, Treble and Bass.
CONCLUSION __If it were not for the transformer this pedal would
be near totally transparent. Love it or not???
It is damn effective.
thefineprintBogner had Rupert Neve design him the Lynhurst Compressor.Amazing but at $100 more than a Keeley it did not sell at all and
was discontinued after just one year but was offered for3 years
to get rid of the pedals. Too bad as it is totally 110% killer!!!
$150.00 USD
MMK ELECTRICSFIREWEED FUZZ
A small builder from Alaska gives us an Electra Distortion circuit with an
added FET circuit which gives us a 'Fuzzy Drive'. The Layout is Volume
but has an internal switch for a darker mellower tone.
___
CONCLUSION ___
It has very good sound. It sounds like a good Fuzz
stacked on equally good overdrive. Reasonably
priced for a handmade.
NO NAME
FUZZ
$13.00 USD
Do not ask, LOL. Not the first nor the last. In the past unlabeled
pedals were factory seconds but those were forever ago and were
hand assembled. This would be machine made with tiny surface
mount parts like a TV set or a radio etc.The layout is Volume, Tone and Gain with a toggle that scoops
the Mids.
CONCLUSION __
These come and go on both AliExpress and Temu.It is not a clone just a basic beginners circuit. Myguess it is an OpAmp using the LED pilot light asits clipping diode. It sounds quite good. A Fuzz isall about maximum distortion so cheap partsadding theirs can be an asset, LOL.
.jpg)
Yerasov AMPS
This company has been making amps and later pedals since 1953. The 2 pedals that caught myattention are the RS-10 full range gain & the BC-10 high gain drives. Both have been aroundfor 12 years. They do have new pedals but not surprising with wars and political unrest thereare not any videos.
YERASOV
RS-10 & BC-10
DistortionsBoth pedals are hardclippers.The RS layout is Volume, Gain, Low cut, Bass and Treble and
a toggle for a Bright. The BC10 Volume, Gain, Bass, Mids and Treble.
CONCLUSION __
Handmade with seriously good parts.Both pedals have punch, definition andclarity. The price is very good. All inall damn impressive.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg){kind=link}